RXSOL - Scale Remover-11

This is a strongly surface conditioner and cleaner designed to descale , concentrated liquid compound developed for rapid and through cleaning of heat transfer surfaces by chemically removing rust and water scale.

Packing Size:

25.00 Kg.(PWD)

Image:

Thumb:

Note:

It is a non-volatile Alkaline liquid and does not attack metals except aluminium, zinc and magnesium.

Related Products:

DE-SCALER / DE-LIMER

Descalex Polymer ( Heat Exchanger)

Descalex Powder

Descaling Liquid 25 Ltrs

Featured Product :

Featured Product

Article News:

Get rust free surfaces with Alkaline Descalers

Largest Descaling Supplier in INDIA

Lime scale remover supplier in Ulhasnagar, Kalyan

Seaclean for Soot Cleaning

Descaling chemicals supplier in Elamkulam, Cochin - India

Short Description:

Strongly surface conditioner and cleaner designed to descale , concentrated liquid compound developed for rapid and through cleaning of heat transfer surfaces by chemically removing rust and water scale.

FAQ:

Descaler quantities and using procedure ?

Hydrochloric acid is the aqueous solution of hydrogen chloride gas (HCl). It is a strong acid, and the major component of gastric acid. It is also widely used in industry. Hydrochloric acid must be handled with appropriate safety precautions because it is a highly corrosive solution.

Alias:

IMPA 550924, HCL 30% QUALITY

Application:

Hydrochloric acid is a strong inorganic acid that is used in many industrial processes. The application often determines the required product quality.

Regeneration of ion exchangers

An important application of high-quality hydrochloric acid is the regeneration of ion exchange resins. Cation exchange is widely used to remove ions such as Na+ and Ca2+ from aqueous solutions, producing demineralized water.

Na+ is replaced by H3O+
Ca2+ is replaced by 2 H3O+

Ion exchangers and demineralized water are used in all chemical industries, drinking water production, and many food industries.

pH Control and neutralization

A very common application of Hydrochloric acid is to regulate the basicity (pH) of solutions.

OH- + HCl H2O + Cl-

In industry demanding purity (food, pharmaceutical, drinking water), high-quality Muriatic acid is used to control the pH of process water streams. In less-demanding industry, technical-quality hydrochloric acid suffices for neutralizing waste streams and swimming pool treatment.

Pickling of steel

Pickling is an essential step in metal surface treatment, to remove rust or iron oxide scale from iron or steel before subsequent processing, such as extrusion, rolling, galvanizing, and other techniques. Technical-quality HCl at typically 18% concentration is the most commonly-used pickling agent for the pickling of carbon steel grades.

Fe2O3 + Fe + 6 HCl 3 FeCl2 + 3 H2O

The spent acid has long been re-used as ferrous chloride solutions, but high heavy-metal levels in the pickling liquor has decreased this practice.

In recent years, the steel pickling industry has, however, developed hydrochloric acid regeneration processes, such as the spray roaster or the fluidized bed HCl regeneration process, which allow the recovery of HCl from spent pickling liquor. The most common regeneration process is the pyrohydrolysis process, applying the following formula:

4 FeCl2 + 4 H2O + O2 8 HCl+ 2 Fe2O3

By recuperation of the spent acid, a closed acid loop is established. The ferric oxide by product of the regeneration process is a valuable by-product, used in a variety of secondary industries.

Hydrochloric Acid is not a common pickling agent for stainless steel grades.

Production of inorganic compounds

Numerous products can be produced with hydrochloric acid in normal acid-base reactions, resulting in inorganic compounds. These include water treatment chemicals such as iron(III) chloride and polyaluminium chloride (PAC).

Fe2O3 + 6 HCl 2 FeCl3 + 3 H2O

Both iron(III) chloride and PAC are used as flocculation and coagulation agents in wastewater treatment, drinking water production, and paper production.

Other inorganic compounds produced with hydrochloric acid include road application salt calcium chloride, nickel(II) chloride for electroplating, and zinc chloride for the galvanizing industry and battery production.

Production of organic compounds

The largest Hydrochloric acid consumption is in the production of organic compounds such as vinyl chloride for PVC, and MDI and TDI for polyurethane. This is often captive use, consuming locally-produced Muriatic acid that never actually reaches the open market. Other organic compounds produced with Muriatic acid include bisphenol A for polycarbonate, activated carbon, and ascorbic acid, as well as numerous pharmaceutical products.

Domestic and Industrial as cleaning Compound :

Hydrochloric acid is a fundamental chemical, and as such it is used for a large number of small-scale applications, such as leather processing, household cleaning, and building construction. In addition, a way of stimulating oil production is by injecting Hydrochloric acid into the rock formation of an oil well, dissolving a portion of the rock, and creating a large-pore structure. Oil-well acidizing is a common process in the North Sea oil production industry.

Many chemical reactions involving Hydrochloric acid are applied in the production of food, food ingredients, and food additives. Typical products include aspartame, fructose, citric acid, lysine, hydrolyzed (vegetable) protein as food enhancer, and in gelatin production. Food-grade (extra-pure) Muriatic acid can be applied when needed for the final product.

Packing Size:

25.00 Ltr.

Image:

Thumb:

Related Products:

Descaling Scalefoe Compound

Safe Acid Descalex powder

Descalex Polymer ( Heat Exchanger)

Featured Product :

Featured Product

Short Description:

POLYMER BASED non-reactive coating materials which makes thin film barrier on the surface after dry. Due to the formation of RXSOL THIN barrier film on the surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Alias:

Slip Coat Hold Block Resist, RBM HOLD BLOCK, GREEN BARRIER, HOLD SURFACE PROTECTOR, PRELOAD 300, HOLD BARRIER XR, Paint Protector

Active Matter:

72-81

Application:

Rxsol hold block is a Heavy Duty protective Solution for hold of vessels, which carrying corrosive and / or messy cargos such as sulphur salt petcock coal and concentrates. It can be easily removed with it

Recommendation Dose for smooth surface :
for Sulphur, Salt, etc 100 Ltrs/Hold for HANDYMAX & 150 Ltrs/Hold for PANAMAX
& for Petcoke, Coal, etc 200 Ltrs/Hold for HANDYMAX & 250 Ltrs/Hold for PANAMAX

This materials can be use directly with low pressure machine or manually by garden spray pump. in general practice on smooth & clean surface each drums of 210 ltrs covers 2000 to 2500 sq meter while on rough and rusted surface require more quantities of materials.

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

for HANDYMAX (5 Holds) : In general 500 Ltr to 1000 Ltr RXSOL-22-2210-210 require to cover area up to 12 mtrs , i.e approx 1/2 drum to 1 drum of material is sufficient for each hold , while
for PANAMAX (7 Holds) : In general 1000 Ltr to 2000 Ltrs RXSOL-22-2210-210 require to cover full area. , i.e approx 3/4 drum to 1.25 drums of material is sufficient for each hold.

Note:

This Emulsion is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials.

Precaution : 1 > Deposition of previous cargo / Lime wash should be removed .
2 > Newly Painted surface should be fully cured.

Other Valuable Hold Cleaners :::

Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020, Part No.- RXSOL-22-2202-050

Part No.- RXSOL-22-2202-035, Part No.- RXSOL-22-2202-210

Slip Coat RXSOL HOLD BLOCK ::: Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results. Part No.- RXSOL-22-2210-210, Part No.- RXSOL-22-2210-025, Part No.- RXSOL-22-2210-050

BARRIER HOLD COAT ::: Highly effective ecofriendly Product blending of natural ingredients which is provide thin temprory film on Hold Surface to protect corrosion. This is making barrier between corrosive cargo like Sulphur, Salt, Petcoak, Cement etc and Hold surface. Part No.- RXSOL-22-2211-210

COAL REMOVER rx hold ::: A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2215-210, Part No.- RXSOL-22-2201-025, Part No.- RXSOL-22-2201-050

Hold Wash Concentrate RX ::: RXSOL hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination. Part No.- RXSOL-22-2204-210, Part No.- RXSOL-22-2204-025, Part No.- RXSOL-22-2204-050

Rock Phosphate Cleaner rx hold ::: A powerful penetrating mixed chemical products to remove heavy Rock Phospate deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2201-210

PCS Hold Clean ::: RXSOL PCS is an innovative, concentrated liquid product specifically engineered to attack, penetrate and remove Coal Carbon, pet coke, lime deposition accumulations from cargo and storage tanks, Also Developed for cargo hold cleaning to remove stains. Part No.- RXSOL-22-2208-210

HBI CARGO Hold Wash Concentrate RX::: RX HBI CARGO Hold Wash Concentrate RX is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for HBI CARGO . it can be used as a powerful\ stand alone cleaner for HBI CARGO dust and deposition. Part No.- RXSOL-22-2216-210, Part No.- RXSOL-22-2216-025

Related Products:

Bilge Coat RXSOL

Hold Wash Concentrate RX

AQUATUFF LIQUID 50 Ltr

Cement Remover RX Hold

Featured Product :

Featured Product

Article News:

Aquatuff price for Mumbai, Kolkata, Chennai, Vizag, Kandla

Aquatuff good foaming qualities

Shipchandler in Vizag Port

Lime wash is not suitable for cargo like Sulphur loading

Short Description:

Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Information:

Polymer based water soluble liquid product which is resulting thin transparent and temporary film on cargo hold surfaces. Polymer based Thin film acts as barrier layer between the cargo and the ship hold surfaces.

Slip Coat RXSOL HOLD BLOCK is a Heavy Duty protective Solution for the hold of vessels which carrying corrosive and / or messy cargos such as Sulphur, Salt, Petcoke, coal and concentrates. It can be easily removed after discharging of cargo .
FEATURES AND BENEFITS:...................................
$ Protects metal against corrosive cargo.
$Safe on all coatings, and to the personnel handling it.
$ Protects paint against cargo penetration.
$ Environmentally friendly.
$ Safe to use in occupied / covered areas.
$ Reduces turn around times.
$ Easy to Direct Spray.

Other Important materials, which help to control corrosion on the metal surface. Chemically SULPHUR producing STRONG acid in presence of moisture under excess of temperature, Freshly prepared acid during the reaction rapidly damaging steel surface. This can be prevented by ACID neutralisation method. RXSOL BILGE COAT is specially meant to solve this issue. For more details of product, You may click here to know more details about product and using procedures.

RXSOL Bilge Coat (Sulphur Acid Neutralizer) Acts as Acid Neutralizer formed during sulphur voyages.

HOLD BLOCK chemicals supplier.

FAQ - Slip Coat

Capt. ravi.prakash 4:54 PM (3rd JAN'19)
to RX MARINE INTERNATIONAL
Dear Sir,
Ref our telcon, please find attached Hold photos after discharging of Australian Coal and cleaning (without applying any chemicals) in oct 2018 . Then vsl loaded Indonesian Coal and will be discharging same in abt a week. Next voyage is getting fixed to load Urea from Saudi. Basis the photos, which chemical would you suggest to be used. We were thinking of RXSOL PCS along with Aquatuff. Fyi, Owners have supplied 1200 Ltrs of Aquatuff HF last month.
Thanks & best regards,
Capt. ravi.prakash
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

Dear Sir,

In image we can observe that BOTTOM line of hold is rusted, And your plan to load CLEAN CARGO like urea which is ammonia-ted product can result further heavy rusting. So here our suggestion is to go with PCS with Aquatuff HF. And after cleaning hold rust can be treated with RUST CONVERTOR by the ratio of 1:100 Ltr with water, this will change free iron rust content to orginal metal colour. ( For treatment of rust Each Hold maximum 50 Ltr RUST CONVERTOR REQUIRED ) and Finally HOLD can be treat with SLIP COAT polymer, with dilution ration of 1:100 Ltr with Water. ( For Each Hold polymer coating maximum 50 Ltr Slip Coat REQUIRED )

Refer this link to get IMAGE of CARGO HOLD. http://rxmarine.com/sites/default/files/CARGO HOLD CONDITION REPORT 12.10.2018(1).xlsx

USES of slip coat provide transparent POLYMER layer in between UREA and HOLD surface.

Application of SLIP COAT is always be wise decision, this will not only protect hold metal surface from UREA contact, but also helps to release cargo without adhesion on cargo.

Thanking you

WBRGDS

Silvi

http://rxmarine.com/sites/default/files/CARGO HOLD CONDITION REPORT 12.10.2018(1).xlsx

Slip Coat Hold block supplier in all major port of India and Middle East. We are keeping ready stock at Kandla, Mundra, Sikka, Navlakhi, Hazira, Mumbai, JNPT, Visakhapatnam, Gangavaram, Chennai, Ennore, Kolkata, Haldia, Paradip, Fujairah, Dubai, Sharjah, Abu Dhabi. Slip coat also works as surface releasing agent and due to its chemicals resitance nature protect metal surface of ship from hazardoue cargo.

Protective Chemicals suitable for both sulphur and petcoke cargoes

FAQ:

Can you please advise us on best chemicals for cleaning hold block applied to ship's bulkhead and tanktop. - Capt Manjit Handa, Marine Surveyor - Noah's Ark Solutions

Comparision Lime wash and slipcoat Holdblock

Salt loading precaution

LIME REMOVER HD is an innovative, concentrated liquid product specifically engineered to attack, penetrate and remove lime deposit accumulations from cargo and storage tanks. It is a liquid product designed to Clean and eliminate limestone caustic lime deposits and dry lime stains from cargo tanks and other large common metal surface installations.

Alias:

Marichem Lime Cleaner, Chemo’s Lime Out and Marichem’s Lime Cleaner, Lime Wash

Active Matter:

36-45

Application:

Use For remove heavy lime deposition from metal surface.

It is highly concentrated and powerful penetrating agents materials which is effectively react with lime to loosen the bonding strength . Best results can obtain on dry surface of cement. It break down the ionic bond in lime, releasing the lime from any surface to which it has adhered.

This liquid mixture specifically designed to deal with hard cases of lime cargo deposits or dry lime stains. Its proven advantage is the provision of immediate penetration and complete dissolution of lime, the result being a thorough cleaning.

ACTIVE MATTER : 98-100 %

WHY RXSOL22-2213-210 is better ?

Biodegradable & non flammable , Economical very cost effective
Non-hazardous
Non-fuming
Safe for paint, chrome, aluminum, glass, rubber, plastic, brass & stainless
Dissolves cured cement, concrete, mortar, grout, stucco
Cleans aluminum
Also comes with a foaming spray nozzle
Will not remove rubberized cement
Suitable for the removal of cement deposits and dry stains.
Due to its higher concentration its chemical reaction is very fast.

Packing Size:

220.00 Kg.(Liq)

Image:

Thumb:

Using Procedure:

Lime Remover HD must be used according to the hold surface area that is to be covered, the extent of contamination, the available downtime and the application method being used. Lime Remover HD is covering 10-12 Squire Meter area.

Using Procedure

I - Spray Method

Spray Method is applicable where a high–pressure machine, suitable to process chemical solutions, is used with a 50% Lime Remover HD/water solution to inject directly onto the surface area. Then, the solution must be left to act for 15 minutes followed by thorough rinsing using a high–pressure water supply source. After , the surface must be left to dry. The percentage of dilutions may vary depending on the thickness and hardness of the deposited lime.

II – Soaking Method

Soaking is a method where Lime Remover HD is used undiluted and applied with conventional methods such as an elongated thick and hard brush, a hard sponge etc. Once applied, Lime Remover HD must be left to soak for 30 minutes. Rinse with water, and followed by leaving the surface to dry. Usually, this method is applicable to heavily contaminated small and large tank surface areas and installations.

Note:

Feature and Benefit :

• Ideal for the removal of limestone, birdlime and dry lime stains from all common metal tanks surface and installations.

• Applicable to all metal surfaces and parts except those being galvanized and those made of Tin, Zinc, Aluminum and Lead.

• A water–soluble, non–flammable liquid mixture.

• Can be used to safely neutralize strong alkaline liquids and solids.

• No known effect on rubber or plastic compounds.

• May be combined with a specific range of other products.

• Cost effective, easy to apply and use.

Related Products:

Cement Remover RX Hold

COAL REMOVER rx hold 210 Ltr

AQUATUFF - LIQUID 210 Ltr

Slip Coat RXSOL HOLD BLOCK 210 Ltr

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Featured Product :

Featured Product

Article News:

Aquatuff High Foam resulting good foam with high pressure machine

Metal Brite also use to clean Cement deposition

what is slip coat ?

Which is the best ship hold marine cleaning chemicals

Short Description:

Lime out cleaner for changing hard deposits of LIME into loose bond in sludge formation, chemically its neutralizing lime of alkali and breaking solid deposited bond of LIME from ship cargo hold and storage tanks.

Information:

Lime Cleaner / Remover largest stockist and supplier in Mumbai, JNPT, GOA, Manglore, Kandla - Deen Dayal Upadhyay, Mundra, Hazira, Kolkata, Haldia, Paradip, Gangavaram, Visakhapatnam, Chennai, Ennore, Tuticorine, Fujairah, Abu Dhabi, Dubai, Sharjah, Oman, Bahrain.
To get Best Factory Sale price of Lime Cleaner - Lime Remover mail us ::: mail@dubichem.com

Lime out cleaner for changing hard deposits of LIME in to loose bond in sludge formation.

Why Lime Cleaner used for Ship Hold cleaning?

Before cleaning of lime, we have to learn about lime composition and its bonding nature as well as dissolving properties of lime.
Lime is composit mixture of calcium and its powder state becomes lumps due to presence of moisture. Here it is clear that if you want to remove composed lime from surface calcium bond should be break. Means if we'll add such material on lime bonded surface which can weaken the bond of calcium, then cleaning of lime from surface will be easy.

Acid like muriatic, phosphoric, sulfuric etc easily breaking the bond of hardened calcium, but these acids are highly corrosive not only to handle but also dissolving iron metals, which is causing pit and roughness on metals surface.

Then again question comes how to remove lime without damaging the metal surface and also easy to use by personnel.

We worked on this concept and developed Lime cleaner remover with effective blend of corrosion inhibitors and we balanced acid with mixture formulations.

Lime cleaner save time to remove lime deposition from ship hold surface. And lime remover easily dissolves and break lime deposited hard bond also due to non fuming nature its application becomes easier.

We have lime cleaner standards packing is in 25, 50, 210 litre drum.

And feel happy to say that we are largest lime cleaner suppliers in Kandla Deen Dayal Upadhya port, Hazira, Mumbai, Goa, Chennai Ennore, visakhapatnam, gangavaram, Kolkata, Haldia, paradip, fujairah, sharjah, Dubai, Abudhabi.

Email us to get more details of lime cleaner and also get factory sale discounted price mail@rxmarine.com

Lime Wash cleaning chemicals manufacturer and supplier in India and Middle East - UAE. We are keeping ready stock in various packing size. Lime remover supplier in Mundra, Kandla, Sikka, Navlakhi, Hazira, Mumbbai, Nhava Seva, JNPT, Manglore, Kakinada, Chennai, Ennore, Visakhapatnam, Gangavaram, Kolkata, Haldia, Paradip, Fujairah, Dubai, Ajman, Abudhabi, Sharjah.

Lime deposit cleaning chemicals - LIME WASH

FAQ:

Why Lime Cleaner used for removal of Lime from Ship Hold surface?

Hull Boat cleaner is Acidic Hull Cleaner to Clean boat hull by quickly removing algae, lime, scale and chalking. A safer alternative to harsh acids and chemicals used for hull cleaning. Safe on aluminium boats and pontoons; Biodegradable, Non flammable.

Alias:

Boat Cleaning Chemicals, Boat Washing Shampoo

Active Matter:

Application:

Very Fast & Easy way to Remove Chalky Effect of Oxidation on Fiberglass Gel and also clean grime/algae off your boat - fiberglass. After cleaning resulting and gives as new boat cleaning effect.

Boat cleaner is a product specially formulated to dissolve heavy stain.

Packing Size:

5.00 Ltr.

Image:

Thumb:

Using Procedure:

Easier to apply and clean Yacht & Boat. RXSOL brand boat Cleaning Products removes heavily deposited oxidation effectively Fibreglass Hull & Boat surface. RXSOL brand boat cleaner is formulated environmentally friendly boat cleaners ingredients and many other marine cleaners selective product. Our end user easily can recognize before and after cleaning operation with the amazing cleanup job. RXSOL water stain and scale dissolving formula effectively dissolve scale algae deposit and remove those hard to shift stains from fibreglass boats from Boat Bottom.

Note:

Other Valuable Product :::

‎Boat Wash shampoo · Boat Soap · ‎Hull Cleaner · ‎Bilge Cleaner

Related Products:

Featured Product :

Featured Product

Short Description:

Safe for use on fiberglass, Metal and Painted surface.

Information:

Popular Cleaner for cleaning of sea growth, Scale lime Deposits from exterior thru-hulls and running gear propellers, rudders, shafts, struts, trimtabs, outdrives, etc. It comes in Liquid form to make easy for spray cleaning process and Its Gel formula helps to sustain on vertical surface area.
Classified as Hull Cleaning Chemicals.

Also classified as Hull Cleaning Agent, Marine Acid Wash.

Hull Cleaner Acidic Formula

FAQ:

Hull Cleaner

Muriatic Acid supplier and exporter.

Active Matter:

Packing Size:

30.00 Kg.(Liq)

Image:

Thumb:

Using Procedure:

Use neat or dilute depends on nature of cleaning works.

Note:

Commercial Grade

The spent acid has long been re-used as iron(II) chloride (also known as ferrous chloride) solutions, but high heavy-metal levels in the pickling liquor have decreased this practice.

The steel pickling industry has developed Muriatic Acid regeneration processes, such as the spray roaster or the fluidized bed HCl regeneration process, which allow the recovery of HCl from spent pickling liquor

Related Products:

Metal Brite

Rust Remover Safe

Scale Remover Silica Hard water

Passivation Liquid RX

Citric Acid Powder

Oxalic Acid PWD 25 Kg

Sulfamic Acid Descaler Cleaner with colour indicator Inhibitor

Sodium Hypo Chlorite 12-15%

Sodium Bisulphite Liq

Sodium Thiosulfate Pentahydrate

Sodium Meta Silicate

Safety Accessories:

Hand Gloves Chemical resistance

RESPIRATORY PROTECTION FULL MASKS

Goggle Chemical Protective

Featured Product :

Featured Product

Article News:

Hold Cleaning chemicals

Sodium Hypo Chlorite IMPA 550960

Short Description:

Muriatic acid in forms acidic mists. Muriatic Acid supplier and exporter.

Bentonite Supplier for Oil Field Industries. It is a drilling - grade Bentonite which is naturally occuring clay .It is a High Yield Natural Sodium montomorillonite. It meets API 13A Standards.

Bentonite, very fine grind material mostly composite by clay mineral, especially montmorrilonite which chemically describe as hydrous alumina-silicate which contain small amounts of alkali and alkali -earth metals.

Alias:

Bentonite API, Montmorrilonite

Application:

• It is Viscosifier and Filtration control agent for water based Mud Systems.
• It is used in drilling muds for controlling bore hole stability. It is utilized in drilling muds to extract drill cuttings from the bit.
• It is also used for clearing cat litter

Bentonite, sometimes refer as sometimes referred to as Montmorrilonite is a naturally occurring substance, composed of a number of layers, each approximately 10 angstroms thick, and each consisting of two tetrahedral and one octahedral unit. This structure is responsible for three important characteristics, the ability to absorb large amounts of moisture, the ability to exchange ions and thixotropic gel formation.

Bentonite Powder

We are reputed as one of the most overruling Bentonite Mineral Powder Manufacturers and Suppliers in India. The unmatched quality and efficacy of Bentonite Powder in various sectors like Drilling, Effluent Treatment, Electrical, Engineering, Fertilizer, Foundry, Iron ore Pelletization, Liquor & Food, Pesticides and Pharmaceutical has played a vital role in the enhancement of the demand. Moreover, Bentonite Clay Powder is available in varied grades.

Application

Drilling

Effluent Treatment

Electrical

Engineering

Fertilizer

Foundry

Iron ore Pelletization

Liquor & Food

Pesticides

Pharmaceutical

Packing Size:

50.00 Kg.(PWD)

Image:

Thumb:

Using Procedure:

Bentonite can be Broadely classified in 2 grades :

Granular: Granular is the preferred option for filling trenches where the conductor is covered with Bentonite and then water poured over and mixed in the trench.

Powder: Powder is the preferred method for pouring into bore holes to en-sure the mixture is of a thin enough consistency to reach the bottom of the bore hole. If diamond drilling is required for deep holes, possible 40m depths and deeper and the Bentonite is to be pumped through the core in to the hole, then powder would be the preferred option.

The greatest application of bentonite in industries is the result of its swelling property, while combine with water able to perform multitude jobs. The sodium bentonite having more water absorption capacity makes it suitable for industries like Foundry and Civil engineering application and the calcium bentonite absorb lesser than Sodium still it has some special application like cosmetics, paper, Animal feed binder as many more to describe. Swell Well Mine Chem drilling grade Bentonite is basically a sodium bentonite acquired naturally from the mines. The mineral is processed using the advanced chemical technology for drilling from ores. The below features highlights the quality of the Swell Well Mine Chem Drilling Bentonite, Offers impermeability, Provides high barrel yield. Bentonite is valued in foundry sand binding, drilling mud and sealing agent in civil engineering works, bentonite is used as a mud constituent for oil and water well drilling. Swell Chem Mine is offering Bentonite products for drilling industry. What is Drining Bentonite ? Drilling Bentonite is the Bentonite formed to be used in drilling mud or fluid.

Note:

Advantage

• It helps improve hole cleaning capacities of drilling fluids.
• It is effective as a filtering agent.
• It promotes borehole stability.
• It can be added directly to fresh water or fresh water based drilling fluids.

Related Products:

Dolomite

Calcium Chloride Anhydrous

SODIUM Chloride Crystal PURE

Safety Accessories:

Hand Gloves Chemical resistance

Chemical Handling Apron

Featured Product :

Featured Product

Article News:

Water Treatment Chemical STOCKIST in India - Middle East

Salt Exporter and Supplier

Short Description:

Maximum swelling property, while combine with water, Our fine quality of sodium bentonite having more water absorption capacity then ordinary one.

Information:

Bentonite premium quality products exporter from India to Middle East - Dubai.

Various grade of Bentonite :::

Drilling Grade 1

API 13A Section – 9 Grade Bentonite Powder:

Physical Analysis:

PROPERTIES	PROTOCOL	UNIT	REQUIRED	RESULT
Viscometer Dial Reading at 600 rpm	API Spec. 13A:2004/ ISO 13500: 1998	r/min	30	36
Yield Point / Plastic Viscosity Ratio	API Spec. 13A:2004/ ISO 13500: 1998	_	3 Max	2.5
Filterate Volume	API Spec. 13A:2004/ ISO 13500: 1998	ML	15 Max	14.6
Moisture Content	API Spec. 13A:2004/ ISO 13500: 1998	% by weight	10.0 max.	10
Dry Screen Analysis(Residue Greater than 75 Microns)%	API Spec. 13A:2004/ ISO 13500: 1998	% by weight	4.0 max.	3.0 - 4.0

Drilling Grade API Packing 25 Kgs

IOP Grade Bentonite lumps :

Properties	Protocol	Unit	REQUIRED
Moisture Content	API Spec. 13A:2004/ ISO 13500: 1998	% by wt.	12% to 40 % max.
LOI	IS:2000(P-1)-1985	% by wt.	5 – 10.
Free Swelling Volume 2gm/100ml	ASTM D 5890:1995	ml	32 min.
PH Value of 5% gel	IS:6186-1986	pH	8.0 – 10.0
Plate Water Absorption (16 hours)	ASTM E 946	%	720- 760
Gel Time 2.5gm/25 ml	IS:12446-1988	second	Instant
Methylene Blue Value	API spe 131:2004/ ISO 10416:2002	mg/gm of clay	350 - 400
Lumps size	IS:6186-1986	%	10 to 40 m.m.

Chemical specification:

Alumina as AL2O3%>15.0-19.0 Sodium max 2.70

Calcium as Cao%1.5-2.0 Na2O 2.0-2.5

Mgo 2.5-3.5 iron as Fe2o3% 13.0-18.0

IOP Grade Lumps | 25 Kg Packing

Product: Benotonite Powder for Grouting

Physical Analysis:

Properties	Protocol	Unit	Result
Liquid Limit	IS:12446-2007	ml/100 gm	350 - 450
Moisture Content	API Spec. 13A:2004/ ISO 13500: 1998	% by wt.	12.0 Max
Dry Screen Analysis (passing through 75 um sieve)	IS:12446-2007	% by. Wt.	85.0 min.
Free Swelling Volume 2gm/100ml	ASTM D 5890:1995 or IS:12446-2007	ml	30 min
PH Value of 5% gel	IS:12446-2007	pH	9.5 - 10.0
Gel Time 2.5gm/25 ml	IS:12446-1988	second	Instant
Filterate Volume	API Spec. 13A:2004/ ISO 13500: 1998	ml	20 max
Viscosty at 600 rpm	API Spec. 13A:2004/ ISO 13500: 1998		30 min
Methylene Blue Value	API spe 131:2004/ ISO 10416:2002 / IS:12446-2007	mg/gm of clay	350 - 400

Grouting Grade | 25 Kg Packing

PRODUCT: Ceramic Grade Bentonite Powder

Physical Analysis:

Properties	Protocol	Unit	Result
Free Swelling Volume 2 gm/100ml	IS:12446-2007	ml	12 - 18
Base Exchange Capacity	IS:12446-2007		70 - 80
Moisture Content % by weight	IS:12446-2007	%	10.0 - 12.0
PH Value 2% slurry	IS:12446-2007	0pH	8 - 9
Quartz Content	IS:12446-2007	%	2 - 3 %
Dry Mesh % Passing 200 B.S.S	IS:12446-2007	%	85 Minimum

Ceramic Grade | 25 Kg Packing

Sodium montomorillonite

Sodium Meta Silicate is special blend of chemical with corrosion inhibitor is suitable for Aluminum passivation. Chemical concept behind passivation is to provide light coat of a protective material, such as metal oxide, to create a shell against corrosion.

Alias:

Sodium Silicate (Water Glass)

Active Matter:

100

Application:

Pure aluminium naturally forms a tough resistant oxide, almost immediately that protects it from further oxidation in most environments. Aluminium alloys, however, offer little protection against corrosion. There are three main ways to passivate these alloys: alclading, chromate conversion coating and anodizing. Alclading is the process of metallurgically bonding a thin layer of pure aluminium to the aluminium alloy. Chromate conversion coating is a common way of passivating not only aluminium, but also zinc, cadmium, copper, silver, magnesium, and tin alloys. Anodizing forms a thick oxide coating. This finish is more robust than the other processes and also provides good electrical insulation, which the other two processes do not.

IN general practice prior to storing hydrogen peroxide in an aluminium container, the container can be passivated by rinsing it with a dilute solution of nitric acid and peroxide alternating with deionized water. The nitric acid and peroxide oxidizes and dissolves any impurities on the inner surface of the container, and the deionized water rinses away the acid and oxidized impurities.

Packing Size:

25.00 Kg.(PWD)

Image:

Thumb:

Related Products:

Passivate - 1 SS Cleaner

Passivate - 2 SS Surface Cleaner

Passivation Liq. Blend with Citric Acid

Passivation Liquid RX

Passiphos - 683

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Featured Product :

Featured Product

Short Description:

Sodium Meta Silicate passivation chemical is suitable for Aluminum

RXSOL ORG 10 is a high pH formultion that has been designed specifically to remove organics, silt and other particulate deposits from all polyamide, polysulfone and thin film composite membrane surfaces.

RXSOL ORG 10 is a powdered buffered alkaline detergent developed , Especially for cleaning alkaline tolerant reverse osmosis and ultrafiltration membranes.

Alias:

Floclean MC 11, Evatec, Genesol 703, Alkaline Membrane Cleaner (powder), Cleaner, Alkaline Membrane, Ref: 701ROC-004 Mkr: Advanced Watertek Industries LLC, Nalco pc-98, Dremachem HP, ULTRASIL 10, FLOCON MC50

Active Matter:

Application:

Inspect cleaning tank, hoses and cartridge filter. Install new filter elements.
Fill cleaning tank with RO solution then, Slowly add 25 grammes of ORG 10 for each litre of cleaning tank capacity. Thoroughly mix cleaning solution by using a mixer or by circulating it through the cleaning pump. The solution may be heated to improve cleaning effectiveness.
Do not exceed the membrane manufacturer’s temperature limits.
Circulate the solution through the membrane bank in the feed direction for one hour at the flow rate recommended by the membrane or system manufacturer. If the manufacturer’s recommendations are not available, the following guidelines may be used.

Maintains production capacity

Special formula maintains membrane flux rate

Chelates and buffered alkalinity effectively remove fouling agents from alkaline

Tolerant RO and UF membranes

BENEFIT :::

Dissolves freely to reduce labor and cleaning time, Easy to add balance formulation eliminates need for adding separate additives or boosters, Rinse quickly and completely to reduce cleaning time

ITS ADVANCE FORMULATION Makes Economical use cost and recommended use dilution, Chlorine free formulation helps assure compatibility with membrane to Extent membrane life.

Packing Size:

25.00 Kg.(PWD)

Image:

Thumb:

Using Procedure:

Spiral wound membrane

Membrane diameter (inches)	Flow rate per tube (parallel flow) l/min (US gallons/min)
4	23 (6)
6	53 (14)
8	91 (24)
10	114 (38)
12	204 (54)

Hollow fibre membrane

Membrane diameter (inches)	Flow rate per element (parallel flow) l/min (US gallons/min)
4	19 (6)
8	57 (24)
10	76 (38)

TO USE

For normal CIP cleaning or soak cleaning RO and UF system completely , Pre dissolve in warm water before adding to system. Typically used Concentration is 0.7 to 1.5 % or 9-20 ounces of RXSOL ORG 10 per each 10 Gallon (67-150 grams/10 l) f water. Circulate throughout the system for 20 Minutes at a temperature of 120-160 degree F (49 – 71 degree C)

Note:

Observe the recommendation of the manufacturer of the membrane for Maximum temperature.

Note:

In cases of heavy fouling, the first return flow (up to 15% of the cleaning tank volume) should be diverted to drain to prevent redeposition of removed solids.
In multi-pass systems, best results will be achieved if each pass is cleaned separately.
The solution should be discarded if it becomes turbid or discoloured by removed material.
A fresh solution should then be prepared before cleaning additional passes.

Rinse with permeate before returning the system to service.

Related Products:

Industrial Odor Neutralizer Membrane Smoke Odor Solution Fragrance

Membrane Alka Cleaner ORG MC 511 Liq

Membrane Antiscalant ALKA 191T

Membrane Cleaner RXSOL- 3304

ORG MC 882 Membrane Cleaner

Featured Product :

Featured Product

Article News:

Keep RO systems clean with Acidic-Membrane-Cleaner

Short Description:

High pH formultion that has been designed specifically to remove organics, silt and other particulate deposits from all polyamide, polysulfone and thin film composite membrane surfaces.

Information:

REVERSE OSMOSIS MEMBRANE Powder CLEANER with ALKALINE nature for effective cleaning of COLLOIDAL FOULING, BIOFILM AND ORGANIC FOULANTS TYPICALLY FOUND IN REVERSE OSMOSIS AND NANO-FILTRATION MEMBRANES SYSTEMS.

This product APPEARANCE is WHITE POWDER - PH OF A 2% SOLUTION - 12.0 and BULK DENSITY - 0.95

Membrane ALKA Clean RXSOL ORG -10 Powder MC11 is alkaline pH products to clean and remove organics, silt and other particulate deposits from membrane polyamide, polysulfone and thin film composite membrane surfaces.

Reverse Osmosis RO Membrane ALKALINE Cleaner RXSOL ORG -10 is Powder formulatory product. We are manufacturer, exporter and supplier in Mumbai - MIDC Taloja, Koparkhairna, Mahape, PAWANE Turbha, Nashik Pune, Gandhidham GIDC, Kolkata, Haldia, Paradip, Patna, Munger, Ranchi, Tata, Chennai - Ennore, Visakhapatnam, Manglore, Goa, Fujairah, Abudhabi, Ajman, Sharjah, Diera, UAE - Middle East, Barka, Muscat, Oman

Alkaline RO Membrane Cleaner

Cleaning of Scale and mineral deposits from truckmount becomes very easy by using RXSOL-41-4148-010 ( TRUCK Mounted Cleaner Descaler ). Routine cleaning and removal of hard water deposits from truckmount heat exchangers, fittings, valves, screens, metering systems, sensors, and water lines etc always be wise deceision. RXSOL-41-4148-010 premium powder formula of specialty ingredients is a for easier and safer cleaning.

Alias:

Truck Mount Descaler

Application:

Good Advice Apply RXSOL-41-4148-010 on WET surface only, Do not let dry the product on surfaces without rinsing. Every machine is different. Basically, pour liquified descaler ( powder with water premixed ) into the water box. If your truckmount has a bypass orifice remove it and replace the plug or cap on the manifold.

Packing Size:

1.00 Kg.(PWD)

Image:

Thumb:

Using Procedure:

Inhibitor protects truck mount components.

First of all mix 1 Kg powder with 4 Ltr water to get powder dissolve completely in to the BUCKET. Then disconnect truck mount water inlet and solution outlet hoses. Drain water completely from water box, Then add 4 Ltr powder mixed water into water box to dissolve. Then start engine to run solution through truck mount atleast for 15 minutes to dissolve scale from surface. Finally connect water inlet hose and solution hose, flush with water for 5 minutes. Add 250ml of Alkali Cleaner RXSOL ORG - 6 to water box and run for 2 to 5 minutes to neutralise residual of scale ion. Then circulate system with clear water to remove all loose particle as well as cleaner present inside the system.

Note For heavy scale build-up Truck Mount Descaler may be diluted with mix 1.5 Kg powder with 4 Ltr water and the solution should be circulated for a longer period.

Note:

Dilutions rates recommended :

Light Duty Cleaning : 500 Gram : 4 Ltrs WATER
Normal Cleaning : 1 Kg : 4 Ltrs WATER 15 minutes or Time duration can be increased up to 45 minutes for Heavy deposit cleaning.
Heavy Duty Cleaning : 1 Kg : 4 Ltrs WATER 15 minutes

Related Products:

Concrete Truck Cleaner (CRMC-83)

Heavy Duty Garbage Truck Cleaner

Truck Wash Brightener

Aluminium Brightner Alu Brite

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Featured Product :

Featured Product

Article News:

Effectively remove scalers with the help of Polymer Descaling Chemical

Car Coating Remover from RxMarine helps you remove car coating with ease

Short Description:

For removal of hard water deposits from truckmount heat exchangers, fittings, valves, screens, metering systems, sensors, and water lines etc

Information:

Truck Mount descaler manufacturer, Supplier and exporter in various packing and customized packing. Truck mount descaler are avialable with us in Powder as well as in Liquid stage. Powder form of Descaler are easy to carry and storage while liquid stage of Truck mount descaler is easy to use and application. Liquid decaler cane be easily apply in to the system. Premix with water doesn't required as POWDER Truck mount descaler can't use directly for application, its mixing with water must required.

With regular use of this quality product, Equipment perfomance can be increased. Its powdered formulation provides easier and safe handling. This product can be classified as a powdered inhibited descaler for removal of hard water deposits. Regular removal of scale deposit prevents blokage of hoses and protects delicate components of truck mount's.

Truck mount descaler
1 Kg can descale 1 TRUCKMOUNT fully. Pl. be note dont forget to order 250ml of Alkali Cleaner RXSOL ORG - 6 , As after descaling ORG-6 plays very important role to neutrailze entire system.

Inhibited descaler powder

Hydrochloric Acid 34% / Extra Pure Hydrochloric Acid 36% Hydrochloric Acid 33% Exporter from Mumbai , India
Hydrochloric acid is an important and widely used chemical. The largest end uses for hydrochloric acid are steel pickling, oil well acidizing, food manufacturing, producing calcium chloride, and ore processing.

Alias:

Hydrochloric Acid

Packing Size:

1.00 Bottle Liq

Image:

Thumb:

Featured Product :

Featured Product

Short Description:

Lab Reagent

RXSOL brand highly purified and well balanced Barium Chloride 50% saturated solution packed for LABORATORY uses and testing purpose.

Other similar product is ::: Barium Chloride Solution, 10% Neutralized

Alias:

Barium Chloride Solution

Packing Size:

1.00 Bottle Liq

Image:

Thumb:

Featured Product :

Featured Product

Short Description:

RXSOL brand highly purified and well balanced Barium Chloride 50% saturated solution packed for LABORATORY uses and testing purpose.

Single component rust neutralizing system giving excellent adhesion to subsequent painting materials . on applying to metal surface it penetrates through and chemically reacts with the rust on the surfaces and forms a fine coherent film of protective coating on the surface which also serves as an excellent base for the primer.

Alias:

GALMET RUST CONVERTER

Packing Size:

25.00 Ltr.

Image:

Thumb:

Related Products:

Anti Rusting Liquid Solution

Corrosion Inhibitor for metal RUST Preventive

ORG CITRISURF 77 Rust Cleaner

Rust Cleaner Powder

Featured Product :

Featured Product

Short Description:

RXSOL POTABLE WATER TEST KIT is a monitoring kit enabling shipboard personnel to regularly test the drinking water onboard to help determine whether it is suitable for drinking. The Convention requires the vessel crew to frequently inspect their potable water system and monitor the quality of drinking water, itself. RXSOL POTABLE WATER TEST KIT enables shipboard personnel to test the drinking water as part of their inspection procedures and demonstrate they are monitoring water quality.

Alias:

Drinking water test kit

Application:

RXSOL POTABLE WATER TEST KIT is used for testing potable water, whether supplied from shore side or produced onboard. It is recommended that potable water be tested weekly, (or as may be required by the federal or Port Administration) as well as when potable water is taken onboard. Manual reading should be recorded on a chart or log and retained onboard for at least 12 months.

Feature :

Classified as potable water testing for ships.

Portable water testing equipments product.

RXSOL cooling water test kit

Marine potable water test kit

RXSOL potable water test kit

RXSOL boiler water test kit

Potable water test kit-c

Drinking water standards test kit

Packing Size:

1.00 Complete SET

Image:

Thumb:

Using Procedure:

RXSOL POTABLE WATER TEST KIT contains everything needed to monitor the drinking water onboard in accordance with WHO guidelines. The kit measures pH, free and total chlorine, plus total coliforms and E.coli bacteria. Because variation in the pH level can affect chlorination, it is important to monitor and control the pH. Additionally, potable water should be free of bacteria that are harmful to humans. Testing for coliform bacteria determines whether or not harmful bacteria are present. The test is an important safety measure, especially when potable water is loaded in port.

Chlorine testing is done using the DPD Activator solution is used to determine total chlorine (the sum of free and combined chlorine). Chlorine level is determined using kit and a visual color comparator . Presence/absence test for simultaneous detection of total coliforms and E.coli is done by using Coliform kit.

It should be noted that the sample must be incubated 18-24 hours at 34.5 °C to 37 °C.

Note:

Features

• pH Tester and Buffer Kit
• Chlorine Ampoule Test Kit, including color comparator
• Coliform Test Kit, including UV lamp and safety goggles
• Convenient Carrying Case

Benefits

• Monitors pH level of drinking water to ensure pH level supports chlorination.
• Monitors the level of free chlorine in the drinking water.
• Monitors presence/absence of total coliforms and E.coli.
• Provides for safety of crew
• Easy to use
• Centralized storage for test kits' components
• Withstands rigors of shipboard operations
• Easy to carry

Related Products:

Chloride Test Kit

Nitrite Test Kit

Alkalinity Test Kit ( p-m Total )

Sulphite (Sulfite) Lab Test Method

Featured Product :

Featured Product

Article News:

Get bacteria free water with Coliform Test Kit

Different Alkalinity testing kits from RxMarine

Oil Filed Maintenance Chemicals

Short Description:

RXSOL POTABLE WATER TEST KIT is a monitoring kit enabling shipboard personnel to regularly test the drinking water onboard to help determine whether it is suitable for drinking.

Information:

Potable Test Kit supplier in Mumbai, Kolkata - Haldia, Buz buj, Vizag - Visakhapatnam, Gangavram, Chennai - Ennore, Gandhidham - Kandla Mundra. Potable test Kit available for our regular customer with 50% owner discount. Our test kit easily available with all Indian shipping agent and shipchandler. RXSOL Potable Water Test Kit range very easy to handle by any staff easiest compliant Marine Potable Water Testing Kit enables ships staff to monitor the quality of the drinking water on board the ship.

potable water testing on ships

portable water testing equipment

RXSOL cooling water test kit

marine potable water test kit

RXSOL potable water test kit

RXSOL boiler water test kit

potable water test kit-c

drinking water standards test kit

Drinking Water Test

Leading Manufacturer, Supplier and Exporter of Hydrochloric Acid L.R. Grade. Fine quality of Hydrochloric Acid (HCl) LR Grade ( 35-36%) used for Laboratory and many other high end chemicals reaction.

Alias:

Muriatic Acid Laboratory Grade, Muriatic Acid, Hydrogen Chloride, Hydrochloric Acid Concentrated

Application:

We are keeping various grade of Hcl - hydrochloric acid ar grade, commercial grade hydrochloric acid, hydrochloric acid cp grade

Packing Size:

2.50 Ltr.

Image:

Thumb:

Using Procedure:

Hydrochloric Acid, ConcentratedReagent also available in 100 mL
Hydrochloric Acid, ConcentratedReagent also available 500ML
Hydrochloric Acid, ConcentratedReagent 37% also available 2.5L
Hydrochloric Acid, SolutionLaboratory3 mL8%
Hydrochloric Acid, SolutionLaboratory 500ml
Hydrochloric Acid, SolutionLaboratory2 x 1 L
Hydrochloric Acid, SolutionLaboratory500 mL
Hydrochloric Acid, SolutionLaboratory500 mL1.0
Hydrochloric Acid, SolutionLaboratory1 L
Hydrochloric Acid, SolutionLaboratory1 L1.0
Hydrochloric Acid, SolutionLaboratory2 x 1 L1.0
Hydrochloric Acid, SolutionLaboratory3.8 L1.0 (3,800ml)
Hydrochloric Acid, SolutionLaboratory500 mL0.5 (500ml)
Hydrochloric Acid, SolutionLaboratory1 L

Note:

RX MARINE INTERNATIONAL classified as most convenient platform for export of many lab Chemicals, Acid and solvents LR-Grade to Middle East and Gulf Industries. We are keeping ready stock of Hydrochloric acid pure LR grade to full fill demand of our regular customer in Kolkata, Mumbai, Chennai, Gandhidham, Visakhapatnam, Fujairah, Dubai.

Related Products:

Sulphuric ( Sulfuric ) Acid LR 2.5Ltrs

ISO PROPYL ALCOHOL IPA

Nitric Acid 3.0 Normal Solution

Phenolphthalein indicator

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Featured Product :

Featured Product

Short Description:

Hydrochloric / Muriatic Acid Laboratory Reagent

Information:

Hydrochloric Acid Laboratory grade pure acid for Institution and Lab - Industries. Export container full or part load basis facility available with us. In order to process your orders without delay, we request that you provide the required business documentation to purchase this product.
To order chemicals, medical devices products please provide identification that includes your business name and shipping address via email mail@rxmarine.com .

Cost-effective recovery of fresh water from seawater is critical to a wide range of industries such as the power, chemical, marine, oil and gas industries. During the distillation process, the formation of scale on heat transfer surfaces can significantly reduce heat transfer efficiency and increase operation and maintenance costs. Scale formation depends on temperature, concentration and pH, but generally takes the form of:

Alias:

Altreat 400

Application:

RXSOL Altreat 400 scale inhibitor is a polycarboxylic acid that controls inorganic scale formation. Small amounts of this copolymer, based on maleic acid, effectively handles large quantities of dissolved salts, thus preventing precipitation,settling and baking onto heat transfer surfaces. RXSOL Altreat 400 also impairs crystal growth, modifying the crystal structure to create a soft sludge byproduct that does not adhere to heat transfer surfaces.RXSOL Altreat 400 readily dissolves in any type of water. The typical dosage to feedwater ranges from a minimum of two parts per million (ppm) to a maximum of 10 ppm, depending on the quality of the seawater. This versatile antiscalant effectively performs at the range of temperatures encountered during mechanical vapour compression and during single and multi-effect distillation processes.Test results demonstrate that RXSOL Altreat 400 is more effective than other scale inhibitors under variable conditions,including water type, temperature and run time.

Packing Size:

210.00 Ltr.

Image:

Thumb:

Using Procedure:

Instructions for use

Normal dosing rate 2–10 ppm (max. 10 ppm), depending
on the properties of the water to be treated. Ensure adequate mixing at chemical tank before dosing into the system.
Recommended operating temperatures: 50°–80°C.

Related Products:

ANTISCALANT 9209 RX ( seawater distillation plants )

Antiscalant C.I ALKA

Antiscalant ORG EV 2030

Antiscalant Polymer

Membrane Antiscalant ALKA 191T

Safety Accessories:

Gloves Disposable

Goggle Chemical Protective

Featured Product :

Featured Product

Short Description:

During the distillation process, the formation of scale on heat transfer surfaces can significantly reduce heat transfer efficiency and increase operation and maintenance costs. RXSOL Altreat 400 also impairs crystal growth, modifying the crystal structure to create a soft sludge byproduct that does

COIL BRITE RX Yellow for TOUGH CLEANING PROBLEM

Concentrated Aluminum Coil Cleaner

COIL BRITE RX is a concentrated blend of Specifically designed to clean aluminum heat transfer coils of dirt, oil, and scale. COIL BRITE RX is also effective in cleaning stainless steel and fiberglass.

Alias:

Coil Brite, Nu Brite, Acti Brite,Cal Brite, Foam Brite, Alu Brite, Ali Brite

Application:

Suited for use with almost any coils, the Air Conditioning Coil Brite Rx Yellow is a heavy duty detergent easily removes dirt, grease and oil.

A unique detergent action is gentle yet strong enough to remove carbon deposits.

Other Grade of Coil Cleaner :::

Coil Brite Rx Yellow - Part No.- RXSOL-16-1680-005 --- www.rxmarine.com/coil-brite

Coil Cleaner - Part No.- RXSOL-41-8672-025 --- www.rxmarine.com/Coil-Cleaner-RXSOL

Coil Cleaner ( Non Rinsing Type ) - Part No. - RXSOL-16-1697-025 --- www.rxmarine.com/coil-cleaner-non-rinsing

Condenser Coil Cleaner - Part No.- RXSOL-50-5015-025 --- www.rxmarine.com/Condensor-cleaner

Evaporator Coil Cleaner ::: Part No.- RXSOL-51-6004-025 --- www.rxmarine.com/evaporator-coil-cleaner

Coil Cleaner Free from ACID ::: Part No.- RXSOL-16-1082-025 --- http://rxmarine.com/Coil-Cleaner-Free-from-ACID

C-SHINE Alkaline coil cleaner ::: Part No- RXSOL-16-1668-025 --- www.rxmarine.com/C-SHINE-RXSOL-coil-cleaner

Packing Size:

3.78 Ltr.

Image:

Thumb:

Using Procedure:

Dilute COIL BRITE RX as provided to tough cleaning problems, or dilute in ratios of 1 : 5 to 1 : 15 in water depending on surfaces to be cleaned COIL BRITE RX can be applied with a brush or sprayer on wet surfaces. Apply from the bottom and work up allowing two to five minutes for penetration of the deposits. Rinse well with water while brushing in order to get a brighter surface. For fiberglass, use 1 : 5 ratio with water, spray or brush onto surface, brush off deposits and rinse.

Note:

Availability

COIL BRITE RX is available in UN approved 5 gallon pails, 55 gallon drums and bulk quantities.

Handling
Observe warning label on containers. Normal precautions for industrial chemicals apply.

Related Products:

C-SHINE Alkaline coil cleaner

Coil Brite Rx PINK

Coil Cleaner

Coil Cleaner (Air Conditioning System)

Air Cooler Cleaner 25 Ltr

Air Cooler Cleaner Alkaline 25 Ltrs

Carbon Remover 25 Ltrs

Degreaser Biosolv

DE-SCALER / DE-LIMER

Condenser Coil Cleaner

Radiator Cleaner Acidic

Hand Cleaner Paste, Waterless 1 Kg Pkg

T.POL 20 Ltr BUCKET

Dish Wash 500 ml

Toilet Cleaner-500 ml

Safety Accessories:

Hand Gloves Chemical resistance

Vinyl Gloves (1box =100pcs)

Goggle Chemical Protective

Featured Product :

Featured Product

Video Links:

Coil Cleaner

Article News:

WHY C-SHINE coil required to clean AC Coil?

Short Description:

For cleaning of aluminum heat transfer coils of dirt, oil, and scale,.Developed for TOUGH CLEANING PROBLEM

DISSOLVES SLUDGE THAT BUILDS UP IN HEAT EXCHANGERS: HEAT EXCHANGER CLEANER is a liquid POLYMER - Acidic based new generation material that readily dissolves sludge that builds up in heat exchangers.

Alias:

Chemtreat AH 7 for cleaning heat exchanger, indion-1507, phe descalant Plate Heat Exchanger Descaling Chemical

Application:

PRODUCT ADVANTAGES:
• Compatible with zinc phosphate materials
• Not harmful to equipment
• Less hazardous than hydrochloric acid based materials

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

HEAT EXCHANGER CLEANER:

PRETREATMENT TECHNICAL DATA SHEET:

USE & CONTROL INSTRUCTIONS:
Operating Properties (Typical):

Application:	Maintenance product – special application Circulating the product through the heat exchanger.
OperatingConcentration:	Free Acid: 0.9 - 1.7 points
Operating temperature:	Ambient
Operating time:	Typically at least 30 minutes.

Specific process conditions may warrant operating the above parameters outside of the typical ranges. Please consult your RX MARINE representative:

Charge Instructions:
HEAT EXCHANGER CLEANER is used as delivered at ambient temperatures. If time is not a factor in the clean out, the solution can be diluted up to 50% with water.

Charge details:
1) If used at the 50% dilution: Fill the clean tank approximately ½ full with fresh water.
2) Set valves to proper setting for clean out
3) Plumb the circulating system to the correct side of the heat exchanger Turn on.
4) Slowly add 1 gallon of HEAT EXCHANGER CLEANER for every two gallons of bath (or use the HEAT EXCHANGER CLEANER neat)
5) Allow to circulate for at least ½ hour dependent on sludge.
6) Turn off pump and disconnect plumbing from heat exchanger
7) Flush heat changer with fresh water to remove residual acid.
8) Turn heat exchanger valves back to running positions.
It is important to circulate the solution through the heat exchanger for at least 30 minutes. The cleaning time will vary depending on the amount and type of sludge build-up. After the heat exchanger is cleaned, it is highly recommended that the unit be flushed with water. If this step is not taken, an increase in the free acid of the operating phosphate solution might occur.

PRETREATMENT TECHNICAL DATA SHEET:

Analysis Procedures:
CAUTION: DO NOT PIPETTE BY MOUTH ::: Free Acid
Equipment needed:::
• Burette Assembly
• 5-ml pipette and bulb
• 250-ml flask or beaker
• 100 ml graduated cylinder

Reagents needed:::
• Bromophenol Blue indicator
• 1.0N Sodium Hydroxide

Free Acid Procedure:
1. Using a pipette, pipette 5-ml of your solution into a 100-ml graduated cylinder. Fill the cylinder to the 100 ml mark with DI or RO water, then mix by up ending 2-3 times.

2. Pipette 5 ml of the above dilution to a beaker or flask; add 4-5 drops of Bromophenol Blue indicator. Then add 1.0N Sodium Hydroxide drop-wise until the
solution changes from yellow to blue. Record the number of mls as points of Free Acid.

The concentration is calculated by multiplying the points of Free Acid times the HEAT EXCHANGER CLEANER factor 0.59. This equals the concentration in percent by volume
of HEAT EXCHANGER CLEANER in solution. Points of Free Acid X 59 = Percent by volume of HEAT EXCHANGER CLEANER

PRTREATMENT TECHNICAL DATA SHEET:

Points of Free Acid	Concentration of HEAT EXCHANGER CLEANER in percent by volume	Addition of HEAT EXCHANGER CLEANER per 100 gallons of tank volume (based on using HEAT EXCHANGER CLEANER at 50%)
1.7	125%	0
1.3	100%	0
0.85	50%	0
0.4	25%	25 gallons
0.2	12.5%	37.05 gallons

Note:

Equipment:
The HEAT EXCHANGER CLEANER is used for cleaning Stainless steel heat exchangers.The external pump and circulating system employing the HEAT EXCHANGER CLEANER should likewise be made of stainless steel or of a suitable, non-corrosive plastic.

Related Products:

Alkaline Descaler 25 Ltr

Descalex Polymer ( Heat Exchanger)

Descaling Liquid 25 Ltrs

Descaling Liquid 555

Descaling Chemical Compound for Chiller, Condenser tube of Central AC Plant

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Featured Product :

Featured Product

Short Description:

DISSOLVES SLUDGE THAT BUILDS UP IN HEAT EXCHANGERS. This is a liquid polymeric acid based material that readily dissolves sludge that builds up in heat exchangers.

Alias:

1-Hydroxy Ethylidene-1,1-Diphosphonic Acid [HEDP 60%], Hydroxyethylidenedi(phosphonic acid), Dequest 2010, Etidronic acid, HEDP, AQUACID 105EX, Chelating agent

Active Matter:

58-62

Application:

RXSOL-81-8160-250 chemically having wide range of applications including scale prevention and corrosion inhibition in water treatment.

Hydroxy Ethylidene -1,1-Diphosphonic acid is organophosphonate with multifunctional properties like sequestration, deflocculation, threshold inhibition and hydrolytic stability, as a single active ingredient. Because of the combination of these properties Hydroxy Ethylidene -1,1-Diphosphonic acid has a wide range of applications. One of the most important applications is in scale prevention and corrosion inhibition in water treatment.

Packing Size:

275.00 Kg.(Liq)

Image:

Thumb:

Using Procedure:

HEDP is used as chelating agent. The dosage of 1-10mg/L is preferred as scale inhibitor, 10-50mg/L as corrosion inhibitor, and 1000-2000mg/L as detergent. Usually, HEDP is used together with polycarboxylic acid. It is used as a strong chelating agent for metal ions like Ca, Mg & Fe in water treatment, textile applications. Its efficient inhibition for CaCO3 & CaSO4 alone or in combination with low molecular weight polymers. Very effective in protecting metal corrosion. HEDP also having very strong chlorine stability.

Note:

Storage for ten months in room shady and dry place. Safety Protection: Acidity, Avoid contact with eye and skin, once contacted, flush with water.

Featured Product :

Featured Product

Article News:

Chelating Agent for Metal Ions like Ca, Mg & Fe in water Treatment

Short Description:

Chelating agent, Scale and Corrosion Inhibitor. Scale prevention and corrosion inhibition in water treatment.

HEDP is used as scale and corrosion inhibition in circulating cool water system, oil field and low-pressure boilers in fields such as electric power, chemical industry, metallurgy, fertilizer, etc.. In light woven industry, HEDP is used as detergent for metal and nonmetal. In dyeing industry, HEDP is

used as peroxide stabilizer and dye-fixing agent; In non-cyanide electroplating.

Etidronic acid / HEDP supplier and Exporter in Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Dubai, Sharjah, Abu Dhabi, Ajman.

Synthesis / Manufacturing Process of HEDP:
The primary raw materials used to manufacture HEDP are acetic anhydride and either phosphorus acid or phosphorus Trichloride. The phosphorus trichloride is converted to phosphorus acid within the reaction vessel, and then reacts with the acetic anhydride.

Uses / Application of HEDP
HEDP is used as a strong Chelating Agent for Metal Ions like Ca, Mg & Fe in water Treatment, Textile, Sugar Processing, Dye, Soaps & Detergents.

Etidronic acid

Concentrated Blue Biodegradable degreaser and cleaner for wide range of industrial cleaning applications. Which covers almost all field of engineering cleaning application engines, motors, castings, valves, bearings, tanks, machinery, exterior siding, windows, carpets, concrete floors, asphalt, vehicles, etc.

Alias:

BLAZIN’ BLUE, Loctite Natural Blue Biodegradable cleaner and Degreaser, LOCTITE SF 7840 also known as LOCTITE NATURAL BLUE BIODEGR

Active Matter:

72-81

Application:

Natural Blue Biodegradable cleaner and Degreaser contains no hazardous solvents and can be diluted with water to meet a wide range of industrial cleaning applications.

Advance cleaing formulation makes it all purpose industrial cleaner, As we can define this product as follows :::

Composite cleaner
Glass cleaner
Industrial cleaner
Multi-Metal cleaning chemicals
Steel cleaning compound
Engines degreaser
Motor cleaning chemicals
Mold cleaning chemicals
Valves degreaser as carbon deposite solublizer
Vehicle degreasing agent
Ashphalt softenr
Lubricants emulsifier
Foos Stain cleaner
Tar cleaner

And many more. Its scientific blend of cleaning component effectively loose all depositied grime and soiled, carbonecious deposits...

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

Concentrated Blue RXSOL effective to clean and remove grease, lubricants, cutting oils, fuel oils, tar, road salt, light carbon, food stains, wax, animal fat, mildew, & soot

Concentrated Blue RXSOL although mostly used on decks, has numerous applications, including engine room and engine cleaning, Ro/Ro and ferries car deck bulkhead cleaning, refrigeration spaces, fishing vessel holds, cargo holds and tanks cleaning and general ship, yacht and pressure boat exterior cleaning.

For Floor and plate cleaning - Concentrated Blue RXSOL may be used for different types of cleaning and in a number of ways. Apply a solution of Concentrated Blue RXSOL (5-20%) in warm or cold water on soiled surfaces using brushes, rags or hand spray. Allow 5-10 minutes for the product to act and rinse off with plenty of water. Where soiling persists, the product may be applied undiluted provided that all necessary precautions have been taken.

For Spare PARTS CLEANING

Dilute Concentrated Blue RXSOL with warm or cold water.
If spare parts are heavily soiled Soak for 5 - 10 minutes otherwise for light cleaning operation spray Concentrated Blue RXSOL on parts then finally wipe or rinse to clean.
Dilution levels will vary depending upon the type and amount of substance being removed and the type of surface being cleaned. It is best to begin with a high concentration of Rxsol Concentrated Blue RXSOL cleaner and Degreaser and progress to weaker solutions until the most economical level of effective cleaning is obtained.
Concentrated Blue RXSOL cleaner and Degreaser may attack painted surfaces in concentrations with less than 20 parts water.
NOTE: Optimum performance occurs with stronger concentrations, dilution with warm water, agitation or scrubbing and extended surface contact.
CAUTION: Cleaner residues may inhibit the cure of anaerobic products.

Other typical cleaning method For lightly soiled engines spray or brush Concentrated Blue RXSOL full strength, leave for ten minutes then simply hose off.
If high pressure washing is used, use a solution of 1- 20% Concentrated Blue RXSOL in warm water.
As a spray-and-wipe cleaner for upholstery and hard surfaces, dilute 1:10 Concentrated Blue RXSOL with water and use in an atomiser.

Note:

Storage and Handling :

Store product in the unopened container in a dry location. Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.Material removed from containers may be contaminated during use. Do not return product to the original container. Rx Marine International cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or Customer Service Representative.

GENERAL INFORMATION
Rxsol Natural Blue Biodegradable cleaner and Degreaser is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. For safe handling information on this product, consult the Safety Data Sheet (SDS).

Related Products:

Degreaser 1110 Advanced Cleaner

D'limonene Degreaser Premium Quality CITROSOLV

DEGREASER

Hand Cleaner Paste Waterless 1 Kg X 6 No

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Protective Suit HD

Featured Product :

Featured Product

Article News:

Degreaser Heavy Duty

Natural Blue Parts cleaner

Short Description:

Information:

Natural Blue cleaner and degreaser supplier in Mumbai, Kandla - Gandhidham, Chennai - Ennore, Visakhapatnam - VIZAG, Gangavaram, Kolkata - Haldia, Fujairah, Dubai, Middle East. Natural Blue is concentrated products it can be diluted with water to meet a various wide range of industrial cleaning and degreasing applications. Natural Blue contian biodegradable cleaner/degreaser ingredient without any mixture of no hazardous solvents. Its direction of use is very simple and can be use as a typical cleaning method.

Commonly this product can be asked as Blue cleaner and degreaser, All purpose Industrial cleaner, Blue Cleaner and Degreaser. Blue Concentrated cleaner is biodegradable all-purpose industrial strength, can be economically diluted with water, meets cleaning requirements.

Degreaser, Cleaner, Emulsifier for oil and grease.

DIRECTIONS FOR USE
1.In pressure washers dilute in reservoir so that a 1:100 solution of Concentrated Blue RXSOL is provided at the nozzle.
2. For degreasing around stoves and hot plates use RED NBD PLUS 1:3 with water.
3. For mopping of Industrial floors or working station to clean greas and oil deposits use ½ to ¾ of a cup of Concentrated Blue RXSOL to a bucket of water.
4. As a degreaser use 1 part Concentrated Blue RXSOL with 5 to 10 parts of water.
5. As a vehicle washing compound mix ½ a cup of Concentrated Blue RXSOL to a bucket of water.

Dialuation Ratio according to application :

Application	Dialution Ratio
Heavy cleaning and degreasing: Dip tanks, washing	1:1 to 1: 5
Medium cleaning and degreasing: Fleet maintenance siding, concrete floors, pressure sprayers, floor scrubbers, steam cleaners.	1:20 to 1: 30
Light cleaning: Work areas, windows, walls, woodwork, furniture, carpets, counter tops	1:70 to 1:140

Natural Blue Biodegradable cleaner and degreaser are available in various packing and standrd. We also provide private labeling for Exports and supply to our distributor.

Concentrated Blue RXSOL Biodegradable Cleaner & Degreaser. All purpose, industrial strength, concentrated cleaner and degreaser. Water dilution of Concentrated Blue RXSOL resulting economical cleaning solution as well as non flamable cleaning application.

Alkaline Descaler 25 Ltr

Hydrochloric Acid Conc 25 Ltr

Slip Coat RXSOL HOLD BLOCK 25 Ltr

Lime Remover HD

Boat Cleaner

Muriatic Acid

Bentonite Powder

Alkaline Passivator

Membrane ALKA Clean RXSOL ORG -10 ( Powder )

TRUCK Mounted Cleaner Descaler

Hydrochloric Acid Lab Grade

Barium Chloride saturated Solution

Anti Rust Chemical

Potable Water Test Kit

Hydrochloric Acid LR 2.5 Pkg

RXSOL Altreat 400

Coil Brite Rx Yellow

Heat Exchanger cleaner

HEDP 60%

Natural Blue Biodegradable cleaner and Degreaser